Qsb15kw Park Landscape Water Quality Restoration Aerator

Introduction of submerged jet aerator

    Deep water self-priming submersible jet aerator is characterized by stirring and aeration of water at the same time, with fine and dense bubbles. It can not only obtain high oxygen transfer rate, but also has the advantage that the impeller is not blocked. The strong unidirectional liquid flow leads to effective convective circulation, and the motor load changes less with the water level, so it is suitable for pools with large water level changes. The aeration depth of diving can reach 10m without compressed air. Low cost, easy installation and maintenance.

 

It main scope of application is as follows:

1. Deep water aeration;

2. Aeration and mixing of biochemical tank;

3. Sludge aeration and mixing;

4. High concentration organic wastewater treatment process.

1, Product overview

QSB submersible jet aerator is used in aeration tank and aerated grit chamber of sewage treatment plant. The mixed liquid of sewage and sludge is oxygenated and mixed, and the sewage is biochemical treated or cultured to increase oxygen.

2, How it works

Through the submersible pump, the static water flows through the nozzle to form high-speed water flow, and negative pressure air is formed around the nozzle. After mixing with the water flow through the mixing chamber, the water air mixed flow is generated in the trumpet shaped diffusion management, and the high-speed jet is formed. The water flow with many bubbles is vortex stirred in a large area and depth of water area to complete aeration. The shaft power does not change with the depth of submergence, and the air intake can be adjusted. Therefore, the submerged jet aerator can be used in the pool with large water level change.

3, Model description
QSB-Submerged jet aerator 
0.75-Motor power

4, Product features

The aerator is composed of submersible motor and jet pump, so that water agitation and oxygenation can be carried out simultaneously. It has the advantages of high oxygen absorption rate and non clogging impeller Strong unidirectional liquid flow forms effective convection circulation. And the motor load has little influence with the change of water, so it is easy to install.

5, Main technical parameters

 

6. installation and commissioning

installation diagram:

7.Main material

The special pump base and pump shell are cast with HT250 cast iron, which has certain corrosion resistance and can withstand the impact of a certain load.

The motor shaft of the special aeration pump is made of 2cr133214 corrosion-resistant material, and the measures to eliminate stress concentration are taken in the structural design.

The mechanical seal of the special aeration pump can be made of silicon carbide / silicon carbide, tungsten carbide / tungsten carbide and silicon carbide / tungsten carbide according to the pumping medium,

The design service life of mechanical seal is more than 12000 hours.

The bearings of the special aeration pump are imported NSK Bearings, and their cumulative design service life can be guaranteed to be more than 40000 hours.

The static seal of submersible jet aerator adopts butyl qing-700 ring.

All fasteners of submersible jet aerator are made of stainless steel.

The intake pipe of submersible jet aerator is made of galvanized material.

The nozzle is made of cast iron.
8.quality assurance

After each submersible jet aerator is assembled, the performance test shall be carried out to ensure that the overall performance of the unit meets relevant standards, the first trouble free operation time shall not be less than 8000 hours, and the design service life of the unit shall not be less than 15 years.